Hague Water Softeners
Hague Water Softeners
- Extremely efficient
- Reliable
- Saves Water
- Better for larger families/homes
- Variable 10-year warranty
- Uses tablet or block salt
![Hague Quality Water International Logo Hague Quality Water International Logo](https://thewatersoftenercompany.co.uk/wp-content/uploads/Hague_Quality_Water_International-150x35.jpg)
![Hague water softeners Hague water softeners](https://thewatersoftenercompany.co.uk/wp-content/uploads/swindon-water-softeners-electric.jpeg)
Features
- Blending bypass valve The full 1 inch valve features 1 inch porting throughout to maximize the water flow
- System controller Operates in three languages and retains cycle settings indefinitely, even through power outages. The time of day setting remains in memory for up to seven days without power.
- Whole house, built-in, self-cleaning filter Filters dirt and sediment down to 20 microns – smaller than the human eye can see. Plus, there’s never any cartridges to change and no maintenance is required.
- Safety shut-off system To help prevent the possibility of any overflows, Hague water softeners feature a safety shutoff .
- Fine mesh resin The patented mineral tank with its screened distributor system allows us to pack more resin in the tank and backwash the unit with clean soft water, therefore eliminating the need for a second mineral tank.
- Grid plate The grid plate in the segregated brine tank compartment provides a clear well area to ensure consistent brine concentration.
Specifications
- Max Compensated Hardness–gpg (mg/L) : 35 (600)
- Media type and amounts: Chlorostat (2.0 lb), Filter Media.(1.5 lb), Fine Mesh Resin 0.4 cu. ft (11.3 L)
- Salt usage (used per regeneration) / Capacity: 1 lb / 5,200 grains (0.5 kg / 365 grams)
- Salt usage (used per regeneration) / Capacity: 2 lb / 8,300 grains (0.9 kg / 540 grams)
- Minimum / Maximum water and ambient temperature–oF (oC): 40-120 (4- 49)
- Mineral tank size–in. (cm): 9 I.D. X 16 (22.9 I.D. X 40.6)
- Flow Rate @ 15 psi (1.0 bar) drop – gpm (L/min): 6.0 (22.7)
- Flow Rate @ 25 psi (1.7 bar) drop** – gpm (L/min): 8.7 (32.9)
- Maximum flow rate to drain during regeneration (backwash)–gpm (L/min): 2.4 (9.1)
- Water Pressure (min–max psi) (bar): 20–120 (1.4–8.3)
- Minimum water flow required–gpm (L/min): 2.4 (9.1)
- Controller type: 5 Button
Servicing and Repairs
Some water softeners require a health check on an annual basis, while others only need a 3-yearly service. We'll inform you of the manufacturer’s policy before you make your decision.